Quick answer: a pilot that keeps going out is usually a worn thermocouple, a dirty pilot orifice or a draft. Call (773) 514 3683. If you smell gas, leave and call Peoples Gas at 866-556-6002 before relighting anything.
Standing pilots are for older furnaces
Newer furnaces use electronic ignition. A standing pilot, a small flame that burns continuously, is found on older units in some of the oldest homes; the median home in ZIP 60634 was built in 1952 (ACS 2020-2024). If yours has no pilot, see our ignition page.
Symptom, likely cause, first check
Pilot will not light: no gas, clogged pilot orifice or a gas valve set to off. Lights, goes out when you release the button: the thermocouple is not sensing the flame or is worn. Lights, goes out after minutes or overnight: draft or a weak thermocouple. Yellow, floppy flame: poor combustion; call us. Blue steady flame: normal.
Why it goes out
A thermocouple that no longer senses the flame, a clogged pilot orifice, a draft or an issue in the gas valve shuts the gas off by design. The shutoff is a safety feature, not a malfunction; the fix is to repair the cause.
What you can safely do
Follow the lighting instructions on the furnace label exactly, and only if you do not smell gas. If the pilot will not stay lit after one careful try, stop. Do not hold the button longer than the label says.
Safety
If you smell gas, leave the home, do not touch switches and call Peoples Gas at 866-556-6002 from outside. For carbon monoxide leave and call 911.
Replacement option
If the furnace is very old and the valve is failing, we explain repair versus replacement. Call (773) 514 3683.
Technician insight
In Chicago 60634 the thing that catches most people out with Furnace Pilot Light Problems is the constant cold air leaking through unsealed limestone foundations under 1920s bungalows along Irving Park Road. That draft cools the thermocouple faster than the flame can heat it, so homeowners keep replacing the part without ever sealing the basement rim joists.
Dunning Bungalow Pilot Failure
A homeowner on N. Neenah Avenue reported the pilot would light but shut off within minutes once the furnace tried to fire. Inspection showed a cracked thermocouple and heavy soot on the pilot hood from an aging gas line. The thermocouple and orifice were replaced and the gas line was blown clear. The furnace now holds pilot through the night even when outside temperatures drop into the teens.
Furnace Pilot Light Problems Services We Offer
✓Thermocouple Replacement
Replace the sensor that holds the gas valve open.
✓Pilot Assembly Cleaning
Clear the orifice and clean the pilot hood.
✓Gas Valve Check
Test the valve and its pilot circuit.
Furnace Pilot Light Problems Cost in Chicago 60634, IL
| Service | Typical Range | What Affects It |
|---|---|---|
| Thermocouple Replacement | $175–$275 | Price rises if access requires moving ductwork in older basements. |
| Pilot Orifice Cleaning & Adjustment | $125–$200 | Includes gas pressure check; higher if valve must be rebuilt. |
| Full Pilot Assembly Replacement | $250–$400 | Covers both thermocouple and pilot tube on pre-1970 units. |
| Diagnostic Visit | $95–$125 | Credited toward repair if work is performed same day. |
Ranges are typical for Chicago 60634, IL and confirmed with an exact written quote before any work starts.
How it works
- 1
Safety check
No gas odor, venting ok.
- 2
Inspect pilot
Flame and thermocouple.
- 3
Written quote
Price before work.
- 4
Relight and test
Full cycle.
Pricing
We give a written quote after inspection; the price depends on the part and access to the furnace.