Quick answer: furnace noise tells you where to look. Banging at start-up often points to delayed ignition, squealing to the blower bearings or belt, rattling to loose panels or a cracked part, humming to a capacitor or motor, and ticking or popping to ducts expanding. Call (773) 514 3683 and describe the sound and when it happens.
Sound guide
Bang or boom at start: delayed ignition; stop using the furnace and call. Pop or tick in ducts: sheet metal expanding as it heats, usually harmless. Squeal or screech: blower bearings or a slipping belt. Rattle: loose panel, screw or a failing part. Hum: capacitor or motor. Whistle: restricted airflow through a clogged filter or undersized return. Gurgling on a high-efficiency furnace: condensate drain or trap.
When to stop
A loud bang on ignition, a burning smell or a CO alarm means stop the furnace. For gas smell leave and call Peoples Gas at 866-556-6002; for CO call 911.
What you can safely do
Tighten visible loose panels with the furnace switched off, replace a clogged filter, and record a short phone video of the sound to describe it. Do not remove internal covers.
Older homes
In houses with a median build year of 1952 (ZIP 60634, ACS 2020-2024), long runs of sheet-metal ducts often tick and pop on heat-up. Loud mechanical noise at the furnace is different from duct ticking, and metal-on-metal scraping or grinding is never normal.
What we check first
We locate the sound with the blower on and with the burners off, then check the burner flame pattern, the blower bearings, the belt where fitted, and the panels and duct connections.
Call
Call (773) 514 3683 and describe the sound.
Technician insight
In Chicago 60634 the thing that catches most people out with Furnace Making Strange Noises is how the 1950s-era duct runs along uninsulated basement walls expand and contract loudly once winter temperatures drop and the furnace stays on for days.
Banging from Basement in Irving Park Bungalow
Homeowner reported loud banging each time the furnace started. Inspection found a heat shield vibrating against the cabinet on a unit serving a 1950s brick home. Shield was secured and a support strap added to the main duct. System ran quietly through the next cold snap.
Furnace Making Strange Noises Services We Offer
✓Delayed Ignition Diagnosis
Find why the gas lights late and fix the burner or igniter cause.
✓Bearing and Belt Service
Fix squealing blowers on motors and belt-drive units.
✓Panel and Duct Tightening
Secure rattling panels, straps and duct seams.
Furnace Making Strange Noises Cost in Chicago 60634, IL
| Service | Typical Range | What Affects It |
|---|---|---|
| Diagnostic Visit | $150–$250 | Covers listening test and basic isolation; increases if full disassembly is required. |
| Belt or Panel Tightening | $200–$350 | Labor plus any hardware; common on older units near Irving Park. |
| Motor Bearing Service | $300–$550 | Includes part and labor; price rises with access difficulty in tight basements. |
| Duct Vibration Repair | $250–$450 | Depends on linear feet of seam work and strap additions. |
Ranges are typical for Chicago 60634, IL and confirmed with an exact written quote before any work starts.
How it works
- 1
Identify sound
Record when it occurs.
- 2
Locate source
Burners, blower or ducts.
- 3
Written quote
Price before work.
- 4
Confirm quiet
Run cycles.
Pricing
We give a written quote after testing, before any parts are replaced.